Heating Inspections & Tune-Ups in Berkley, MI
A Fall Checkup Before the First Cold Night Tests Your Furnace
Cracked heat exchangers, dirty flame sensors, and failing inducer motors rarely announce themselves until the furnace is running hard, which is why a fall inspection matters more than a midwinter repair. Charest Heating and Cooling performs heating inspections and tune-ups in Berkley, MI, covering Huntington Woods, MI, Southfield, MI, and Macomb Township, MI as well. We test combustion, safety controls, and airflow on furnaces and heat pumps so your system is ready before temperatures really drop.
Families have trusted our crew with their heating systems for 25+ years, and we treat every inspection as a safety check first and a tune-up second. Our licensed and insured technicians test for carbon monoxide, examine the heat exchanger, clean burners and sensors, and explain anything that needs attention before recommending work. Military members, first responders, and seniors receive 10% off repairs. Schedule your fall heating inspection through our contact page before the busy season arrives.
Heating Inspections and Tune-Ups We Perform
For more information about lorem ipsum or to schedule service, call us at 586-480-5060 or click the button to fill out the form!
Fall Furnace Tune-Ups
A fall visit prepares your furnace for months of steady work. We clean components, check gas pressure, test ignition, measure temperature rise, and confirm the system cycles properly so it runs efficiently when the first cold snap arrives.
Heat Exchanger Inspections
The heat exchanger keeps combustion gases separate from the air you breathe. We inspect it for cracks, rust, and warping, since damage here can allow carbon monoxide into the airstream and requires immediate attention for your household's safety.
Carbon Monoxide Testing
Carbon monoxide is odorless and invisible, making testing essential for any fuel-burning appliance. We check flue gas readings and ambient air around the furnace, confirm proper venting, and recommend working CO alarms on every level of your home.
Burner and Flame Sensor Cleaning
Dirty burners produce uneven flames, and a coated flame sensor can shut the furnace down repeatedly. We clean both, inspect the ignitor, and verify a steady, properly colored flame so your furnace lights reliably every time the thermostat calls.
Safety Control Testing
Limit switches, pressure switches, and rollout sensors shut the furnace down if something goes wrong. We test each safety control to confirm it responds correctly, because a failed safety device can let a dangerous condition continue without warning.
Heat Pump Heating Checkups
Heat pumps need their own fall attention before winter. We test the reversing valve, defrost controls, auxiliary heat strips, and refrigerant charge, making sure your system can switch smoothly into heating and keep up as outdoor temperatures fall.
See Our Work
Explore our recent HVAC projects and see the quality workmanship Charleston Heating & Cooling brings to every job. From installations to repairs and maintenance, we take pride in delivering reliable heating and cooling solutions.
FAQ's
When should I schedule a heating tune-up?
Early fall, typically September or October, is ideal. Scheduling before the first cold snap gives time to fix any problems found and avoids the rush when nearly every household turns on the heat during the same chilly week.
What does a heat exchanger inspection look for?
The technician looks for cracks, holes, corrosion, and warping that could let combustion gases mix with household air. Warning signs include heavy soot around the burners, flame rollout, or unusual carbon monoxide readings during combustion testing of the furnace.
Why does my furnace smell like burning when it first turns on?
A brief burning smell at the first startup of the season is usually dust burning off the heat exchanger and burners. It should fade within an hour. If the odor persists or smells electrical, shut the furnace off and call for service.
How do I know if my furnace is producing carbon monoxide?
You cannot see or smell carbon monoxide, so working CO alarms are essential. Headaches, nausea, or dizziness that improve away from home are warning signs. Charest Heating and Cooling tests for CO during every heating inspection in Berkley, MI.
Does a new furnace still need yearly tune-ups?
Yes, even new furnaces benefit from annual maintenance. Many manufacturers require it to keep warranty coverage valid, and early tune-ups establish a performance baseline that makes future problems much easier to spot before they turn into expensive repairs.
How long does a heating tune-up take?
Most furnace tune-ups take about 1 to 2 hours, depending on the system's condition and whether any issues need further testing. Heat pumps and older furnaces may take a little longer when additional components require closer inspection and testing.
What does a flame sensor do?
The flame sensor confirms the burners are lit, allowing gas to keep flowing. When coated with residue, it cannot detect the flame, causing the furnace to shut off within seconds. Cleaning it is a standard, quick part of every tune-up.
How can I prepare for a heating inspection?
Clear space around the furnace, replace or check the filter, and make a note of any odd sounds, smells, or uneven rooms from last winter. Charest Heating and Cooling uses those details to focus inspections for Berkley, MI homeowners.
Why Choose Us for Heating Inspections & Tune-Ups
Safety Comes First
A heating tune-up is about more than efficiency. Our inspections focus first on carbon monoxide, venting, and heat exchanger condition, giving your family peace of mind that the furnace running all winter is operating safely inside your home.
Fewer Midwinter Emergencies
Most furnace breakdowns happen during the coldest stretches, when systems work hardest. Catching worn parts during a fall inspection greatly reduces the chance of losing heat on a frigid night when repair demand across the region is at its highest.
Efficiency Restored
Clean burners, proper gas pressure, and a clear airflow path help your furnace convert more fuel into usable heat. A tuned system reaches the thermostat setting faster and uses less energy, which keeps winter utility bills more manageable month after month.
Honest Findings, No Pressure
An inspection should give you information, not a sales pitch. We explain what we found, show you any problems, and separate urgent safety issues from items that can wait, so you can make decisions on your own schedule.
Longer Furnace Life
Furnaces that receive yearly tune-ups tend to last longer and break down less often. Reducing wear on motors, ignitors, and controls helps you get more years from your equipment before replacement finally becomes the better financial choice for your home.
Help When You Need It
If an inspection uncovers a problem, you do not have to wait weeks for a fix. Our team answers calls 24/7, and we can often complete repairs promptly, keeping your home warm and your busy family schedule on track.
Walk Into Winter With Confidence
The first cold night of the season is when a neglected furnace is most likely to fail. Charest Heating and Cooling helps families across Berkley, MI and neighboring communities avoid that stress with thorough fall inspections that put safety first and efficiency right behind it. We test for carbon monoxide, check every safety control, clean the components that matter, and explain our findings clearly without pushing unnecessary repairs. A single visit can mean a warmer, safer, and more affordable winter for your household. Book your heating inspection and tune-up through our contact page, and let us make sure your system is ready before the temperature drops.
Why Choose Us
Comprehensive HVAC Services
I provide a full range of heating and cooling services, from installations and replacements to maintenance, repairs, air quality, and zoning solutions. This allows me to meet a wide variety of residential and light commercial HVAC needs.
Year-Round Comfort
I help keep homes comfortable through every season with dependable heating and cooling solutions. From furnace and heat pump services to A/C maintenance and mini split systems, I have solutions for changing comfort needs.
Focus on System Efficiency
I offer services designed to support efficient HVAC performance, including air duct services, home zoning, air filtration, humidifiers, UV lights, and surge protection. I help customers get the most from their heating and cooling systems.
Reliable Local Service
I proudly serve Berkley, MI and surrounding areas with personalized HVAC service tailored to each property. I take the time to understand each customer’s needs and provide solutions suited to their home or business.
Areas We Served
Berkley, MI
Detroit, MI
Warren, MI
Sterling Heights, MI
Dearborn, MI
Livonia, MI
Troy, MI
Westland, MI
Farmington Hills, MI
Southfield, MI
Rochester Hills, MI
Novi, MI
Taylor, MI
Dearborn Heights, MI
Pontiac, MI
St. Clair Shores, MI
Royal Oak, MI
Roseville, MI
Lincoln Park, MI
Southgate, MI
Madison Heights, MI